Msn:christy-wl at live dom cn

Yahoo:christy_chen888 at yahoo dom com

M:8613760152943

LabTool-48UXP USB

The LabTool-48UXP USB is a universal device programmer, which works through your PC's parallel port. It features a 48-pin universal pin driver and an expandable TTL pin driver. It supports over 5600 different devices (including memory, logic and single chip) that's over 11000 devices including different package forms in current software release, new chips are added to the support lists every few months.

Universal pin driver--True universal programming
The LabTool-48UXP features universal pin driver, each pin can supply four different voltage, ground, it also can be configurable as TTL high/low levels with pull-high/pull-low, high-speed clock and high impedance. This advanced pin design lets you program any DIL device of up to 48 pins without needing an adapter.

Unbeatable programming speed
The LabTool-48UXP's on-board intelligence reduces system overhead to a minimum. The LabTool-48UXP has 100% more performance then its predecessor product in program the high density flash chip, it can program a Intel 32 M bit flash chip in less then 60 seconds. 

Following is the programming speed example of labtool-48XP

	Intel 28F320C3B	AMD 29DL323DB
Blank check	18.6 sec	18.9 sec
Program	57.5 sec	76.2 sec
Verify	32.5 sec	33.0 sec
Total	108.6 sec	128.1 sec

 The LabTool-48XP is much faster than its competitors, making it much more productive with today's high density, multi-megabit memory devices.

Device insertion and contact checks--No mistakes!
The LabTool-48UXP performs device insertion and contact checks before it programs each device. It can detect poor pin contact and devices inserted upside down or in the wrong position. This function protects your pocketbook by preventing expensive chip damage due to opetor error.  

EPROM and Flash memory ID detection
Many EPROM and Flash memories have a build-in device ID and manufacturer ID. The LabTool-48UXP can read the device's ID by press hot key to detect the ID and compare its database and determined the chip??/span> correct vendor and product number. This feature is especially useful with secondhand chips and devices that have had their part number accidentally (or intentionally) removed (this function only applied to 28 pin or 32 pin EPROM and Flash).